How To Use: Catalytic Cleaning - AEG EDFDC46UX User Manual

CARE AND CLEANING
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.

11.3 How to use: Catalytic cleaning

The cavity is coated with catalytic enamel. It absorbs fat during catalysis. The catalytic enamel
is self cleaning, do not clean it with a cloth.
Spots or discolouration of the catalytic coating have no effect on the cleaning.
Clean one oven at a time.
Turn off the oven and wait
until it is cold.
Step 1
Select Menu / Cleaning
and press
Duration: 1 h
Step 1
22/32
Before the catalytic cleaning
Remove all accessories and
removable shelf supports.
Clean the main oven with catalytic cleaning
When the cleaning ends the
signal sounds. The oven turns
.
Clean the top oven with catalytic cleaning
Step 2
1
Clean the oven floor and the
water, soft cloth and mild de‐
Step 2
off.
Step 3
2
inner door glass with warm
tergent.
Step 3
When the oven is cold,
clean the oven floor with a
wet soft cloth
Step 4