Setup Utility - Panasonic Toughbook CF-W2DWB02KM Operating Instructions Manual

Setup Utility

The Setup Utility sets the computer's boot-up operating environment (i.e. passwords, startup drive). The following six
menu items are available:
[Information], [Main], [Advanced], [Security], [Boot], [Exit]
Running the Setup Utility
30
1
Turn on or restart the computer.
2
F2
Press the key while [Panasonic] boot screen is displayed
soon after the computer begins the startup procedure.
When the password is set, the screen shown at left will be displayed. Enter
your password, and press the Enter key.
When the Setup Utility is started with Supervisor Password
You can modify all items of the Setup Utility
When the Setup Utility is started with User Password
On the [Advanced] and the [Boot] menu:
• You can view the settings, but cannot change them
On the [Security] menu:
• [Clear registered SD card], [Set Supervisor Password] and [Hard
Disk Lock] will not be displayed
• [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility
Prompt], [Boot First Menu] and [User Password Protection] will be
displayed, but cannot be set
• The User Password can be changed only when [User Password Pro-
tection] has been set to [No Protection]. The User Password cannot
be deleted
On the [Exit] menu:
• [Get Default Values] option will not be displayed
The F9 key does not work
NOTE
When [Password on boot] in the Setup Utility is set to [Disable]:
• The computer can be started up without entering a password
• When the Setup Utility is started:
The password becomes necessary. This alternative prevents the contents of
the Setup Utility from being changed
If you fail to press the F2 key at the right moment, the Setup Utility will not start
up. In this case, let the computer fully boot up, and then perform a shutdown or
restart from Windows.
To close the Setup Utility:
A Press the Esc key.
B Select the exiting method from the [Exit] menu and press the Enter key.
C Select [Yes] and then press the Enter key.