Panasonic Toughbook CF-W2DWB02KM Operating Instructions Manual page 55

Reinstalling
1
Connect the AC adaptor.
2
Change the settings in the setup utility.
Make the following settings.
Return settings to the status at the time of shipment.
Change settings to enable startup from DVD-ROM & CD-R/RW drive.
If you change the status of the computer from that at the time of purchase, we
recommend that you make a note of the settings that are changed.
A Turn on the computer, and press the F2 key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password, and
press the Enter key.
B Press the F9 key.
At the confirmation message, select [Yes] and press the Enter key.
C Select the [Boot] menu, then select [CD/DVD Drive] and press the F6 key
until [CD/DVD Drive] is at the top of the [Boot] menu.
D Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
E Press the F10 key.
At the confirmation message, select [Yes] and press the Enter key.
The Setup Utility will close, and the computer will restart.
55