Using The Touch Pad; Setup Utility - Panasonic Toughbook CF-W2DWB02KM Operating Instructions Manual

Using the Touch Pad

26
Use the touch pad to move the cursor on the screen and perform computer operations.
A. Work Surface (touch pad)
B. Left Button
C. Right Button
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
NOTE
You can change the speed of the double-click or the operations of mouse but-
tons using [Mouse Properties] screen
• To display [Mouse Properties]:
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
Sensitivity when touching the touch pad can be adjusted
( "Chapter 2: Using the Touch Pad" in onscreen Reference Manual)
When an external mouse is connected and the cursor does not operate prop-
erly:
In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you
want to use the touch pad again, return the setting to [Enable]. (
When using the touch pad, keep the following in mind.
• By design the touch pad is to be used with a finger tip only. Do not place any
object or press down forcefully with sharp-pointed objects, i.e. finger nails,
pencils, or pens on the work surface.
• Try to avoid having any harmful substances, such as oil, come in contact with
the touch pad. The cursor may not work properly in such cases.
Operation
Move the tip of your finger lightly over
the work surface.
tapping or
A right-click: Can only be performed by clicking the
right button.
double-tapping or
Two quick taps, but on the second tap leave your finger
down (applying pressure) and move it on the work sur-
face.
or
While holding down the button, move your finger on the
work surface.
Trace a circle around the edge of touch pad. (
2: Using the Touch Pad" in onscreen Reference Manual)
clicking
double-clicking
"Chapter
page 32)