Nxt Evo Cart; Mounting The Nxt Go Pump Hub - LABORIE NXT Evo Owner's Manual

Table 6-6: UPP Puller NXT LED Signals
Battery Status
Breathing green: Sufficiently charged or charging.
Breathing amber: Battery is low (less than 60 minutes of
operation).
Lack of illumination: Empty/Sleep mode (No declared battery
capacity)

NXT Evo Cart

The NXT Evo is a cart-based system with an integrated All-in-One (AIO) PC. Figure 6-16 identifies the major
components.

Mounting the NXT Go Pump Hub

Use the bracket to mount the NXT Go pump hub to the cart spine. Attach or adjust the height of the mount bracket
using the set screws, as shown in Figure 6-17. Tighten the screws at the desired height to secure the mount bracket in
place. Align the connection points and place the NXT Go pump hub on the mount bracket.
106
AIO Computer
Work Surface
Figure 6-16: NXT Evo Cart and Components
Laborie NXT Evo Owner's Manual
UPP Puller NXT Status
Breathing green: Ready
Breathing green—Fast: Sampling or actuator is in motion.
Breathing amber: Puller is not ready for sampling or motion.
Breathing blue: Firmware upgrade is in progress.
Solid red: Fault
Lack of illumination: Puller is sleeping or shut off.
Infusion Hook
Spine
NXT Go pump Hub
Cart IV Pole
Urocap NXT
Printer Shelf
Castors
LBL-00179 [D]