Multiple Priming Valves - Waterous VPO Priming System Installation, Operation And Maintenance Manual

Safety Introduction
Connecting the Priming Components
3
Product Overview
2 2
3
Installation
3
1
|
51 56
Operation Maintenance

Multiple Priming Valves

Use the illustration and instructions to connect the
push button switch to the priming electronics.
Note: You can connect up to 6 solenoid controlled
priming valves, each with a dedicated switch,
in your application.
1 Connect the priming-pump connector
(DT04-2P) on the push button switch to the
priming pump connector (DT04-4P).
2 Connect the priming pump connector
(DT04-4P) from the previous switch to the
power connector (DT06-4S) on the switch.
3 Connect the priming valve solenoid connector
(DTM04-2P) on the switch to the solenoid
connector (DMT06-2S).