Priming Valve Solenoid - Waterous VPO Priming System Installation, Operation And Maintenance Manual

Safety Introduction

Priming Valve Solenoid

This allows multiple priming valves to be isolated from each other. Only used with single priming pump/multiple priming valve applications.
1
Feature Feature
1 Connector
2 Vent port
3 Mounting holes
Product Overview
Description Description
This connects to the switch—DTM06-2S, cable length: 6.5 inches (165 mm).
This allows vacuum to be pulled from the top of diaphragm.
This mounts the solenoid to the priming valve.
Installation
|
19 56
Operation Maintenance
2
3