Auto-Prime Push Button Switch - Waterous VPO Priming System Installation, Operation And Maintenance Manual

Safety Introduction
Connecting the Priming Components
Product Overview
|
48 56
Installation Operation

Auto-Prime Push Button Switch

Use the illustration and instructions to connect the
standard push button switch to the priming pump
cable.
1 Connect the priming pump connector
(DT04-2P) on the switch to the priming pump
connector (DT04-4P).
2
2 Connect the pressure switch connector
(DT06-2S) on the switch to the pressure switch
connector (DT04-2P).
1
Maintenance