Projector Orientations - Barco UDM Series Installation Manual

3.4 Projector orientations

Supported projector orientations
The projector can be installed on a table or upside down on the ceiling and this in a front projection or rear
projection configuration. Depending on the physical configuration of the projector the projected image has to
be rotated and/or mirrored as well. The projected image can be adapted via the menu Installation >
Orientation. Possible orientations are:
1. Front / Table (F/T)
2. Front / Ceiling (F/C)
3. Rear / Table (R/T)
4. Rear / Ceiling (R/C)
Front projection
The projector is installed, either in a table mount or ceiling mount configuration, at the same side of the screen
as the audience.
Image 3–5
FC Front/Ceiling projection
FT Front/Table projection
SC Screen
TH Theater (Audience area)
Rear projection
The projector is installed, either in a table mount or ceiling mount configuration, at the other side of the screen
opposite the audience.
Image 3–6
RC Rear/Ceiling projection
RT Rear /Table projection
SC Screen
TH BA
BA Backstage area
TH Theater (Audience area)
Prepare to install
R5911438 /08 UDM 35