Turn On The Computer - Panasonic Toughbook CF-C1ADACZ6M Operating Instructions Manual

First-time Operation
4
5
16
4 Connect your computer to a power outlet.
The battery charging starts automatically.
CAUTION
l Do not disconnect the AC adaptor and do not switch the wireless switch to on
until the first-time operation procedure is completed.
l When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
l Handling the AC adaptor
Ÿ Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninter-
ruptible power source (UPS) is highly recommended unless running from the
battery pack alone.
5

Turn on the computer.

A Slide and hold the power switch
CAUTION
l Do not slide the power switch repeatedly.
l The computer will forcibly be turned off if you slide and hold the power switch for
four seconds or longer.
l Once you turn off the computer, wait for 10 seconds or more before you turn on
the computer again.
l Do not perform the following operation until the hard disk drive indicator
Ÿ Connecting or disconnecting the AC adaptor
Ÿ Sliding the power switch
Ÿ Touching the keyboard, touch pad, screen, external mouse, or tablet buttons
Ÿ Closing the display
l Any changes from the default setting of the Setup Utility must not be made until
the First-time Operation is completed.
6 Setup Windows.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the keyboard or touch
pad, and wait until the hard disk drive indicator
l After the computer is turned on, the screen remains black or unchanged for
a while. This is not a malfunction. Wait for a moment until the Windows setup
screen appears.
l During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
l Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
l "Join a wireless network" screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
l You can change the user name, password, image and security setting after
setup of Windows.
l Remember your password. If you forget the password, you cannot use Win-
dows. Creating a password reset disk beforehand is recommended.
l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-
count name) that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without en-
tering a password, "The user name or password is incorrect." may be displayed
and you will not be able to log on to Windows (è page 28).
l The input panel is displayed on "Welcome to the Windows XP Setup Wizard".
Move "Welcome to the Windows XP Setup Wizard" and make sure that the
"Welcome to the Windows XP Setup Wizard" and the input panel do not overlap.
until the power indicator
has turned off.
lights.
turns off.