Panasonic Toughbook CF-C1ADACZ6M Operating Instructions Manual page 30

Troubleshooting (Basic)
n Reference Manual
The Reference Manual is
not displayed.
n Others
No response.
<Only for model with Cam-
era>
The Camera does not oper-
ate.
<Only for model with Cam-
era>
The image of the camera
flickers.
<Only for model with wire-
less WAN>
The message "To assure
compliance with RF expo-
sure requirement, WWAN
cannot be used in this direc-
tion. Do you want to rotate
and disable WWAN?" ap-
pears.
30
l Install Adobe Reader.
A Log on to Windows as an administrator.
B
Click (Start) and input "c:\util\reader\Setup.exe" in [Search programs and files]
then press Enter
.
Click [start] - [Run] and input "c:\util\reader\Setup.exe", then click [OK].
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for Updates...].
Ctrl Shift Esc
l Press + +
that is not responding.
l An input screen (e.g., password input screen at startup) may be hidden behind another
Alt Tab
window. Press +
l Slide the power switch for four seconds or longer to shut down the computer, and then slide
the power switch to turn it on. If the application program does not work normally, uninstall
and reinstall the program. To uninstall,
click (Start) - [Control Panel] - [Programs] - [Uninstall a program].
click [start] - [Control Panel] - [Add or Remove Programs].
l When using the Camera after the computer resumes from sleep or hibernation, wait for about
10 seconds before starting up the software.
l The image of the camera might flicker when taking a picture under the fluorescent lamp.
Change the setting of the anti flicker according to the following procedure.
A Click [Settings] - [Image Control...].
B Change the setting of [PowerLine Frequency (Anti Flicker)].
(Set it to the power-supply frequency in the region).
C Click [OK].
l The message appears when you orient the computer so that the wireless WAN antenna
is placed close to you and then try to rotate the display.
Click [Yes] to turn off the wireless WAN and continue using the computer in the current
orientation. If you do not want to turn off the wireless WAN, click [No]. In this case, the
display will not rotate to the most suitable orientation.
to open Task Manager and close the software application
to check.