Table of Contents
Advertisement
SAFETY SYMBOL SUMMARY
This equipment has been supplied with numerous safety and operating decals. These decals provide important
operating instructions and warn of dangers and hazards. Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal placement and part numbers can be found in the parts manual. Below is
a summary of the intended meanings for the symbols used on the decals.
Safety alert symbol; used to
alert you to potential personal
injury hazards.
Hot surface(s) nearby.
Belt/entanglement hazard; keep
body parts clear of this area.
Fan hazard; keep body parts
clear of this area.
Never change switch position
while engine is running.
Stop engine before making
connections.
Stop engine before fueling.
Hearing protection required
while operating unit with doors
open.
Lift here only.
Engine running.
Auto Exhaust Filter Cleaning
enabled.
Manual/Service Regeneration
M
activation.
Asphyxiation hazard; operate
in well ventilated area.
Dangerous voltage may be
present.
Anchor/tie down point.
Isolate generator to prevent
electrocution hazard.
Use clean diesel fuel only.
Remove negative battery
cable before performing
any service on unit.
Read and understand the
supplied operator's manual
before operating unit.
Unit electrical ground.
Fire/explosion hazard; keep
open flames away from unit.
Burn/scald hazard;
pressurized steam.
Auto Exhaust Filter Cleaning
disabled.
9
Advertisement
Table of Contents
