Generac Power Systems Mobile Power MMG175 Specifications

Mobile Generator – MMG175 Specifications

ENGINE


John Deere
Prime - 217 hp @ 1800 rpm
o
Standby - 241 hp @ 1800 rpm
o
6 cylinder
o
6.8 L displacement
o
Interim Tier IV emissions
o

Steel, single wall fuel tank
342 gal. capacity
o
29 hr. run time – full load
o
Fuel tank built into skid of generator set
o

Fuel consumption at prime:
100% - 10.9 gph (41.3 Lph)
o
75% - 8.2 gph (31.0 Lph)
o
50% - 5.5 gph (20.8 Lph)
o

Cooling system capable of operating at 120°F ambient

Low coolant shutdown
 Radiator and oil drains plumbed to exterior

Rubber vibration dampers isolate engine/generator from frame
 Disposable air filter - paper element

Air filter restriction indicator mounted on control panel

60 Hz engine/generator

Electronic isochronous governing

Utilizes DOC / DPF exhaust filter

Variable Geometry Turbocharger (VGT)

GENERATOR


Marathon Electric
Brushless
o
4 pole
o
Class H insulation
o

Voltage regulation +/- 1% with Marathon SE350 Voltage Regulator

SYSTEM OUTPUT

 3 Position voltage selector switch:
Three phase – 120 / 208V Low Wye
o
Three phase – 277 / 480V High Wye
o
Single phase – 120 / 240V Zig Zag
o

153 kW / 191 kVA – standby, three phase
 138 kW / 172 kVA – prime, three phase

125 kW / 125 kVA – standby, single phase

120 kW / 120 kVA – prime, single phase
Manufactured by Magnum Power ProductsLLC., a wholly owned subsidiary of Generac Power Systems, Inc.
® PE6068HFG94 - turbocharged, diesel engine
®
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 1 of 4
4/12