Generac Power Systems Mobile Power MMG320 Specifications

Mobile Generator – MMG320 Specifications

ENGINE


John Deere
Prime - 384 hp @ 1800 rpm
o
Standby - 422 hp @ 1800 rpm
o
6 cylinder
o
9.0 L displacement
o
Tier III approved
o

Steel, single wall fuel tank
459 gal. capacity
o
24 hr. run time – full load
o
Fuel tank built into skid of generator set
o

Fuel consumption at prime:
100% - 17.9 gph (67.8 Lph)
o
75% - 13.4 gph (50.7 Lph)
o
50% - 9.0 gph (34.1 Lph)
o

Cooling system capable of operating at 120°F ambient

Low coolant shutdown
 Radiator and oil drains plumbed to exterior

Rubber vibration dampers isolate engine/generator from frame
 In-line engine block heater

Disposable air filter - paper element

Air filter restriction indicator mounted on control panel

60 Hz engine/generator

Electronic isochronous governing

GENERATOR


Marathon Electric
Brushless
o
4 pole
o
Class H insulation
o
 Voltage regulation +/- 1% with Marathon SE350 Voltage Regulator

SYSTEM OUTPUT

 Link / Reconnect Board:
Three phase – 120 / 208V Low Wye
o
Three phase – 277 / 480V High Wye
o

278 kW / 348 kVA – standby, three phase

256 kW / 320 kVA – prime, three phase

SYSTEM CONTROLS


Microprocessor-based controller
Backlit, 128x64 pixel resolution display
o
-40°F to 185°F operating temperature range
o
Thermostatically controlled LCD heater
o
Manufactured by Magnum Power Products LLC., a wholly owned subsidiary of Generac Power Systems, Inc.
® RG6090HF485 - turbocharged, diesel engine
®
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
3 2 0
Page 1 of 4
4/12