Turn Off Met-Link Interface; Quit The Application - Observator Instruments MET-LINK Manual

8.8 Turn off MET-LINK interface

Note: Unplugging the sensor from the wireless device will not turn off the module.

8.9 Quit the application

Manual | MET-LINK
Status: Final | Not confidential
We highly recommend to disconnect the
wireless when not taking measurements.
In the menu select "Devices" menu.
1.
Click on "DISCONNECT" button to
2.
disconnect the sensor. This will
immediately turn off the MET-LINK
interface module and turn off the Bluetooth
LED indicator.
1. You can quit the application at any
time by pressing on the return button of
your phone.
Click on "OK" to confirm that you are
2.
ready to shut down the application. This
action will immediately turn off the MET-
LINK interface module.
Page 23 | 31
V20200225