Table of Contents
Advertisement
8.3 Launch the app & connect to sensor
Note: If you want to turn off the module, make sure you disconnect the wireless module from the
application.
Manual | MET-LINK
Status: Final | Not confidential
1. Search for "MET-LINK" application in Google Play store or
alternatively scan the QR code below. Download and open
the software.
2. Wait for the app to load.
3. Search for the device to connect to by pressing on "Find
Device". If you cannot see the device, make sure that the
MET-LINK interface module is available and the blue LED is
on.
4. Select device from the available list. You will notice the
LED indicator turns green when the app is successfully
connected to the module
Green indicator is
flashing
Page 18 | 31
V20200225
Advertisement
Table of Contents
Need help?
Do you have a question about the MET-LINK and is the answer not in the manual?