Unitron Moxi V-R Manual page 4

1. Quick guide
Charging your hearing aids
Before using your hearing aids for the first time,
it is recommended to charge them for 3 hours.
After placing your hearing aid in the charger, the indicator
light on the hearing aid will show the charging state of the
battery until it is fully charged.
Charging: Slow blinking
indicator light
Fully
charged: Solid green indicator light
Left & right hearing aid markings
Blue marking for
left hearing aid.
Low battery warning
2 beeps every
30 minutes
Red marking for
right hearing aid.
Multi-function button with indicator light
The button has several functions, the
primary function is as an on/off switch.
Together with your hearing care profes-
sional, you can decide if it also allows for
volume control and/or program change.
This is indicated in your individual instructions.
Phone calls: If paired with a Bluetooth® enabled
phone, a short press will accept
and a long press will reject an incoming call.
On/Off: Firmly press the lower part of the button for
3 seconds until the indicator light blinks.
On: indicator light is solid green
Off: indicator light is solid red
Enter flight mode: When device is off, press the lower
part of the button for 7 seconds until the solid orange
light appears. Then release the button.
Tap control
(only available for models V9, V7, V5 and V3)
If paired with a Bluetooth® enabled device, multiple
functions can be accessed using tap control, please
refer to chapter 10. This is also indicated in your
individual instructions.
To use tap control tap the top of your ear twice.