Unitron Moxi Fittings Manual

Moxi
TrueFit quick reference fitting guide
Powered by Era, Moxi
™
strategy that combines three proprietary technologies: Automatic Program
with SmartFocus, Natural Sound Balance and Pinna Effect. Your clients can
™
enjoy Moxi attitude with the highest fidelity, most natural sound.
Programming Moxi in TrueFit
This quick reference guide will lead you through the steps of a simplified
fitting for Moxi hearing instruments using Unitron's TrueFit
To detect the Moxi hearing instrument(s), choose your desired programming
interface.
•
If using iCube, insert the batteries into the Moxi hearing instruments and
close the battery door.
•
If using NOAHlink or HI-PRO, open the battery door and insert the
programming cable, using the cable tool, into the Moxi programming port.
N ote: Hearing instrument controls, accessories, easy-t, audio streaming and automatic
microphone options are deactivated during programming.
1. Client
a. Information
NOAH
Within Client, click on Information and enter the client's experience level
with hearing instruments.
Standalone
Within Client, click on Information. Click the New
Client button, enter the client's information and click
Save. Click the Blank Session button to begin a new
session. Specify the client's experience level with
hearing instruments using the drop down box.
b. Audiogram
If using Standalone TrueFit, click the Audiogram
button. Enter the client's audiogram and select the
transducer used for audiometry.
is a beautiful little CRT which features an open fit
™
fitting software.
™
Select the client's hearing instrument experience level.
When using iCube, insert
a battery into Moxi's
battery compartment.
When using NOAHlink
or HI-PRO, insert the
programming cable
into Moxi.