Lifting Machine
d
WARNING:
Make sure that you use lifting wire and other lifting
tools that are not damaged or deteriorated and that
have sufficient capacity required for the work.
Be sure to contact your authorized dealer for correct
lifting procedure, and size and kinds of lifting wire
ropes and lifting tools.
Pull the pilot control shut-off lever to the LOCK
position so that the machine does not accidentally
move while being lifted.
Incorrect lifting procedure and/or incorrect wire rope
attachment will cause the machine to move (shift)
while being lifted, resulting in machine damage and/
or personal injury.
NEVER place loads on the lifting cables and tools too
quickly.
Do not allow anyone to come close to or under the
lifted machine.
The indicated gravity center is for the standard
specification machine. The gravity center will vary
depending on the kinds of attachments and/or
optional equipment to be installed or their position
to be taken. Therefore, take care not to lose the
balance of the machine while lifting.
TRANSPORTATION
5-8