Observe the operating instructions. 2.1 Ambient Conditions 3.2 Hazard Information (in accordance with DIN EN 61010) • The Twister venturi is an electric unit and, as The unit may only be operated: such, carries with it a certain inherent potential •...
4. Adjust the desired speed 4.2 Benchtop Units >>> 100 - 400 rpm (Figure 16). The Twister venturi can be operated as a benchtop 5. Adjust the desired mixing time >>> 0 - 5 min. (Figure 17). unit when a stand is employed.
Page 4
When power is restored or the unit is again nance tasks. switched on, the mixing motor WILL NOT The Twister venturi mixing unit is practically mainte- automatically restart itself. nance-free. Nonetheless, the inlet fi lter and the seals should be cleaned regularly as part of a preventative mainte- nance programme.
13. Troubleshooting Problem Possible cause Corrective action • Power not connected. • Check the power supply. ON/OFF switch fails to work. • Device fuse blown. • Replace the fuse (refer to Sec. 6.4). • Damaged power cord. • Have the device repaired. •...
Need help?
Do you have a question about the Twister venturi and is the answer not in the manual?
Questions and answers