Setting The Time - Lanaform WL-100C Manual

System requirements: iOS ≥10.0,
Android™ ≥5.0, Bluetooth ≥4.2.
Note
You can also use the same functions of the
Sunrise and Sunset Simulator without the
Lanaform Connect app.
The app also allows you to choose the days
(Monday-Sunday) on which you want to acti-
vate the alarm, which is not initially possible
to set from the Sunrise and Sunset Simulator.
Automatically connect
the device to the
Lanaform Connect app
Follow the instructions in the chap-
ter "Preparation before use".
Note
The Bluetooth symbol flashes rapidly( ). If
not, "reset" the device by holding down the
"Bluetooth Connection" button. for several
seconds.
• Make sure the Bluetooth feature is
enabled on your smartphone.
• Download the free Lanaform Connect
app from the App Store (iOS) or
from Google Play (Android™).
• Launch the Lanaform Connect app
and follow the instructions.
• Click Connect a New Device or press
the + button at the top of the screen.
Follow the on-screen instructions to
connect the device to your network.
E-IM-WL100C-Lot001-1.1.indd 6 E-IM-WL100C-Lot001-1.1.indd 6
Note
Please ensure that localization is activated
on your smartphone before connecting the
device to the Lanaform Connect application.
Instructions
Note
The following instructions refer to settings us-
ing the device controls. You can also access
the same settings from the Lanaform Connect
app on your smartphone.

Setting the time

01 When first using, you must set the
time for the Wake-up Light. Once
the device is connected, the time dis-
play will flash for 10 seconds, al-
lowing you to set the time.
02 To set the time, press the "+" and "-"
buttons. Then press the "Set time
& 12/24-hour time format" button.
03 The minutes display will now flash. To
set the minutes, press the "+" and "-"
buttons. Press the "Set time & 12/24-
Hour time format" button again.
04 The display indicates "Ct On". This
function allows you to synchronise
the time on the device with that on
your smartphone, as long as it is
connected to the Lanaform Connect
app. To disable this function, press
the "+" or "-" buttons. The display
indicates "Ct Off". Then press the "Set
time & 12/24-hour time format" button.
18/10/2022 14:30:20 18/10/2022 14:30:20