Advertisement
position. The ignitors on all the burners will spark. Hold down the knob for approximately 10 seconds after the
burner has lit. Releasing the knob too soon will extinguish the flame.
3. Adjust the flame anywhere between the
and
positions. Do not adjust the flame between
and OFF.
If the burner does not light within 15 seconds, turn the control knob off and wait at least one minute
before trying again
To switch the burner off, turn the knob clockwise until you hear the safety click.
After use, always turn the knobs to the off position.
Flame Failure Safety Feature
The flame failure probe cuts off the gas supply to the burner if the flame is blown out.
When lighting the burner on flame failure models, hold down the knob for approximately 10 seconds after the burner has
lit. Releasing the knob too soon will extinguish the flame.
If the flames are accidentally extinguished, turn off the burner and do not try to light it again for at least one minute (to
allow the gas to disperse).
Using the Dual Gas Burners
The dual burner is a very flexible burner. It has one inner and two outer crowns. The inner crown can be controlled
separately from the flames of the outer crowns.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR120DDWGX2/User_Guide_OR120DDWG...
Updated: Thu, 06 Apr 2023 09:19:00 GMT
Powered by
3
Advertisement
