01 BEFORE USING THE PRODUCT Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Warning indicates a potentially hazardous situation that may result in death or severe injury to the user or others. CAUTION Caution indicates a potentially hazardous situation that may result in injury to the user or others, or the loss of property.
Page 3
01 BEFORE USING THE PRODUCT Safety Instructions Read and follow all the safety tips and warnings before using the product. WARNING • Keep the electric cord away from heat sources. Always turn off the product and unplug the power plug before accessing the components inside the product.
02 PREPARATION Parts Diagram Check the parts of the product (exterior in the front and top view and control panel) and how they function. Exterior Check the parts and functions of the exterior of the product. Side View Air quality indicator This shows the air pollution level around the product in real time.
Page 5
02 PREPARATION Parts Diagram Check the parts of the product (exterior in the front and top view and control panel) and how they function. Control Panel (250S) 7 Light sensor 3 S peed button / indicator 5 F ilter reset button / indicator 1 P ower button 2 M ode button / 4 L ight button 6 W i-Fi button /...
button/indicator 1 Power button 2 Mode button / indicator Use the button to turn the product Press the mode button to select on and off. the smart mode → rapid mode → sleep mode. - W hen the product operates for the first time, it is operated in the smart mode.
03 INSTALLATION Setting Up the Product Before using the product, you must remove the plastic wrapping of the inserted Max2 filter. CAUTION Make sure that the power cord is unplugged before opening the covers. Open the cover located at the front ofthe product.
If the buttons do not work, unplug the power cord for • about 10 minutes to discharge, and then connect it again. Connecting the Air Purifier to the Wi-Fi Network (250S Only) Find out the application pairing guide with the link provided below : https://iocare.coway.com/manual/us/air/airmega250s.html...
04 OPERATION Smart Mode - Auto If the product is set to Smart mode, it automatically adjusts the air speed according to the current air quality around the product. The air speed is adjusted as shown in the table below: Air Quality Good Moderate/unhealthy...
Smart Mode - ECO When set to Smart Mode, if the pollution level remains Good(Level 1) for more than 10 minutes, the fan stops automatically to conserve energy. If the product detects air pollution, the fan will automatically restart again. If the pollution level remains Good(Level 1) for more than 10 minutes in smart mode, the fan stops automatically to save energy.
04 OPERATION Checking the Air Quality You can easily check the current air quality around the product using the air quality indicator on the front of the product. NOTE For 250S/250 users, you can also check the current air quality in the smart phone application. Air quality indicator Air quality indicator This indicator displays the indoor air quality in...
Page 12
Cover Open Notification Display When opening the cover while using the product When the front cover is detected open for more than 2 seconds, all indicators will turn off and the product stops all operation. When the front cover is detected closed for more than 1 second, the product returns to the previous operation mode.
Need help?
Do you have a question about the Airmega 250 and is the answer not in the manual?
Questions and answers