Boot Menu; To Change Boot Order - Panasonic Toughbook CF-19KHRAG2M Reference Manual

Setup Utility

Boot Menu

*2
Use the Panasonic USB floppy disk drive (optional: CF-VFDU03U)
*3
The devices under [Excluded from boot order] are not booted.
To change the boot order
To move up, select the device with
To move down, select the device with
To move the device from [Excluded from boot order] to [Boot priority order] or vice versa, select the device with
then press X.
To return to the default setting, press 1.
NOTE
The default order is [USB FDD] -> [Hard Disk] -> [USB CDD] -> [PCI LAN].
To boot from the following devices, make the settings as below.
To boot from
• USB connected device
• LAN
You can select the boot device during start-up of the computer, too. Press Esc soon after [Panasonic] boot screen is
displayed. [Boot Menu] appears and you can select the device. [Boot Menu] appears only when [Boot First Menu] in
the [Security] menu is set to [Enable] (
be changed accordingly.
Boot priority order:
*2
1: USB FDD:
2: Hard Disk: xxxxxxxxxx
3: USB CDD:
4: PCI LAN: xxxxxxxxxx
5:
6:
7:
8:
Excluded from boot order:
USB KEY:
USB HDD:
USB LS120:
, and then press F6.
and
, and then press F5.
and
You need to set
: [USB Port] and [Legacy USB Support] to [Enable] (
: [LAN] to [Enable] (
page 74). When you change the setting in the [Boot] menu, [Boot Menu] will
*3
page 72)
75
and
page 73)
, and