Panasonic Toughbook CF-19KHRAG2M Reference Manual page 64

Wireless LAN
If you enable or disable 802.11a using the pop-up menu of Wireless Switch Utility, the setting in [Device Manager] will
be accordingly changed as below.
Settings in Device Manager
[6. 802.11a/b/g]
[4. 802.11b/g]
[3. 802.11g]
[5. 802.11a/g]
[1. 802.11a]
[2. 802.11b]
Wake Up from Wireless LAN
Enabling the Wake Up from Wireless LAN function
The computer automatically resumes from sleep or hibernation when the computer is accessed from the network server via
the wireless LAN.
1
Click (Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
2
Double-click [Network adapters] - [Intel(R) Wireless WiFi Link 4965AG], and then click
[Power Management].
3
Add check marks for [Allow the computer to turn off this device to save power] and
[Allow this device to wake the computer], and click [OK].
CAUTION
Even if the Wake Up from wireless LAN function is enabled, it will be disabled once the communication stops for even
a moment (for example, when there is heavy signal traffic or the computer is taken out of the communication range of
the access point).
The Wake Up from wireless LAN function will also be disabled if the wireless switch (
set to OFF.
Settings in Wireless Switch Utility
When 802.11a is enabled
a+b+g is enabled
a+g is enabled
a is enabled
When 802.11a is disabled
b+g is enabled
g is enabled
b is enabled
page
64
56) at the ON position is