Panasonic Toughbook CF-19AHJAX1M Reference Manual page 85

Disabling/Enabling Wireless Communication
To check the wireless communication status
1
Click on the notification area and place the cursor over the Wireless Switch Utility
icon ( or
A tool tip appears.
1
Perform either of the following procedures.
Double-click
Click [start] - [All Programs] - [Intel PROSet Wireless] - [WiFi Connection Utility].
NOTE
If you uninstall the Wireless Switch Utility, set the wireless switch to ON beforehand.
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter sleep
Do not turn on/off the switch while Windows is starting up.
To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled]
(default) in the [Advanced] menu of the Setup Utility (
When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the Setup Utility (
Switch Utility icon will not appear in the notification area. All wireless equipment (wireless LAN, Bluetooth, wireless
WAN) will remain ready irrespective of the wireless switch setting.
It may take some time to turn off wireless communication after switching the wireless switch off.
*1
Windows XP: standby
).
, , , or on the notification area.
*1
or hibernation immediately after turning on/off the switch.
page 108).
85
page 108), the Wireless