Panasonic Toughbook CF-19AHJAX1M Reference Manual page 34

Sleep or Hibernation Functions
To enter standby, click [start] - [Turn Off Computer] - [Stand By].
To enter hibernation, click [start] - [Turn Off Computer], then press and hold Shift and click [Hibernate].
CAUTION
While the computer is entering sleep
Do not:
• Touch the keyboard, touch pad, touchscreen (only for model with touchscreen), dual touch (only for model with dual
touch), tablet buttons, or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Operate the wireless switch.
• Close or open the display.
• Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (sleep
It may take 1 or 2 minutes to enter sleep
At the beep, immediately release the power switch. After releasing the switch, do not operate it until the power indica-
tor blinks or goes off.
If you slide and hold the power switch for longer than 4 seconds, the computer will forcibly shut down and unsaved data
will be lost even if you have set [When I press the power button] to any item in [Choose what the power button does] of
[Power Options] in [Control Panel].
If you slide and hold the power switch for longer than 4 seconds, the computer will forcibly shut down and unsaved data
will be lost even if you have set [Shut down] in [When I press the power button on my computer] (
Sleep or Hibernation").
*3
In sleep or hibernation
Do not attach or remove peripheral devices. Doing so may cause malfunction.
Power is consumed in sleep
exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the sleep
Do not turn on/off the wireless switch.
*3
or hibernation
*3
) or goes off (hibernation).
*3
or hibernation.
*3
. Power consumption may increase when a PC Card is inserted. When power is
34
page 31 "Setting
*3
function.