Panasonic Toughbook CF-19AHJAX1M Reference Manual page 71

Fingerprint Reader
When the "Protector Suite *.* has been successfully installed." message appears, click [Finish].
E
At the confirmation message, click [Yes].
The computer restarts.
Log on to Windows as an Administrator.
F
The "Fingerprint software Icon"
• If the icon does not appear, click
NOTE
/
Move Tablet PC Input Panel from upper right to the bottom right or bottom left .
• If this procedure is skipped, the "Please swipe you finger" message may overlap the Tablet PC Input Panel.
3
TPM Fingerprint Utility Initialization
Performed by the Computer Administrator.
The "Invalid TPM status" message is displayed by the "Fingerprint software Icon"
• If the icon does not appear, click
If the TPM is not being used, skip this step.
Click on the "Invalid TPM status" message and then click [Initialize].
A
Follow the on-screen instructions.
NOTE
If the "Invalid TPM status" message is not displayed
*2
Click (Start) - [All Programs] - [Protector Suite] - [Control Center] - [Settings] - [Advanced Settings] - [Trusted Plat-
form Module (TPM)] - [Initialize]. And then click
[Identity] - [Multifactor], and choose a method of authentication.
4
User Fingerprint Enrollment
Performed by each user.
Double-click the "Fingerprint software Icon"
A
Carefully read the License Agreement, and then click [Accept].
B
Select an enrollment mode, and click [Apply].
C
Enrollment mode
You can make the configuration for the enrollment only once during this initialization phase.
• Enrollment to the biometric device
All enrolled fingerprints are stored directly in the fingerprint sensor. The user data will be secured by the
hardware protection keys obtained by the fingerprint sensor. This mode allows up to about 15 fingerprints to
be enrolled.
appears in the notification area.
.
.
*2
(Start) - [All Programs] - [Protector Suite] - [Control Center] -
.
71
in the notification area.