Panasonic Toughbook CF-19AHJAX1M Reference Manual page 125

Recovery Disc Creation Utility
11
When [Recovery disc #1 complete.] is displayed, remove the disc and write contents of
the disc on the label side.
Do not use sharp objects that may leave a mark.
12
Click [OK].
13
Click [OK] on [All recovery discs complete.] screen.
If [All recovery discs complete.] screen does not appear, set a new disc that is same as the disc #1 and
click [OK]. Then create all of recovery discs by following on-screen instructions.
NOTE
The disc created with this utility is only for this computer. You cannot use for others.
Two or more users cannot use this utility with Windows Fast User Switching function.
Additional applications cannot be recovered even if you use a recovery disc created with this utility.
If you interrupted creating a recovery disc, a message of failure may appear in step
ate a new recovery disc again.
You cannot successively create some recovery discs with this utility. To create another recovery disc, perform [System
Recovery Options] beforehand (
If you fail to create a recovery disc or a error message appears, try either of the following procedures.
• Insert the disc correctly.
• Check the disc condition.
• Restart the computer and try to create a recovery disc again.
• Contact Panasonic Technical Support.
page 122). In this case, you can use the disc previously created with this utility.
125
10 screen above. In this case, cre-