Panasonic Toughbook CF-19AHJAX1M Reference Manual page 82

LAN
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility
( page 108).
2
In [Caution], press
3
Press , and then select [Yes] and press
F10
4
Log on to Windows as an administrator.
5
Click (Start) - [Computer] - [System properties] - [Device Manager], and double-click
[Network adapters] - [Intel(R) 82579LM Gigabit Network Connection], and then click
[Advanced].
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Network adapters] and double-click [Intel(R) 82579LM Gigabit Net-
work Connection], and then click [Advanced].
6
Click [Enable PME] in [Property] and select [Enabled] in [Value], and then click [OK].
NOTE
The computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make the
setting by the following steps.
A
Click (Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] -
[Network adapters].
Double-click [Network adapters] - [Intel(R) 82579LM Gigabit Network Connection], and click [Advanced].
B
Click [Wake on Settings] in [Property] and select [Wake on Magic Packet] in [Value], and then click [OK].
C
If you forcibly shut down Windows, the Power On by LAN function will not work.
.
Enter
.
Enter
82