LEITZ ProfilCut Instruction Manual page 20

Health risk!
Wear a respirator!
Health risk!
Cleaning/ drying with compressed air can cause harmful emissions of noise, dust and
atomized liquids / chemicals!
7. Servicing, modifying, sharpening
7.1 General instructions
Service and modifications are only allowed to be done by the manufacturer or by
authorized professional workshops.
Risk of tool breakage!
Only those replacement parts are allowed to be used, which match the requirements of
the original replacement parts of the tool manufacturer.
Sharpening, servicing or modifying of tools is only allowed to be done by experienced
specialists as per the instructions of the manufacturer.
Tolerances, that guarantee precise clamping, have to be observed.
After any sharpening, repairing or modifying, it shall be guaranteed, that the tool
meets the requirements of the European Standard EN 847-1, especially regarding:
20
Specialists must have knowledge and experience of:
- up-to-date engineering standards in the design and construction of
woodworking tools
- national rules and regulations
- relevant safety regulations and standards
- and have the necessary machinery and the required skills to undertake
the task
11/2019 ID.524811 V3.0