Table of Contents
Advertisement
5 | Administrator Settings
– Display of video signals using USB-C
– Docking Station Function
– USB Power Delivery
– Screen InStyle (monitor control)
• "Off"
Disables the USB port so that USB peripheral devices cannot be used.
Note
• By pressing the switch on the far left for three seconds or more when the device's power is on
and when the Setting menu/Button Guide are not displayed, you can make the setting "On" (It
cannot be made "Off" at the same time).
Ethernet
Settings: "On" / "Off"
You can switch between enabling and disabling of the LAN port of the monitor.
• "On"
Enables the LAN port and allows network connections from PCs connected with USB-C.
• "Off"
Disables the LAN port.
Note
• When "USB" is set to "Off", this cannot be set.
Signal Format - USB-C
Settings: "HBR3 / USB3.2 Gen1" / "HBR2 / USB2.0"
The type of signal that can be displayed on the monitor can be changed. Try changing this
setting if the input signal is not displayed correctly or the intended display does not show.
Note
• The default setting is "HBR3 / USB3.2 Gen1" (maximum USB transfer speed is 5 Gbps). When
connecting to a computer that does not support HBR3, set to "HBR2 / USB2.0" (maximum USB
transfer speed is 480 Mbps).
Signal Format - DisplayPort
Settings: "Version 1.2" / "Version 1.4"
The type of signal that can be displayed on the monitor can be changed. Try changing this
setting if the input signal is not displayed correctly or the intended display does not show.
Signal Format - HDMI 1 / HDMI 2
Settings: "4K UHD 60Hz" / "4K UHD 30Hz"
The type of signal that can be displayed on the monitor can be changed. Try changing this
setting if the input signal is not displayed correctly or the intended display does not show.
On-Screen Logo
Settings: "On" / "Off"
When the monitor is turned on, the EIZO logo and certification standard logo appears on the
screen.
36
Advertisement
Table of Contents
