Table of Contents
Advertisement
Note
• The power saving level (Power Reduction, CO
checked on the "EcoView Settings" menu. The more indicators that light up representing the Eco
Performance Level, the higher the power saving level attained.
– Power Reduction: the reduction in the backlight's power consumption as a result of the
adjusted brightness value.
– CO
Reduction: converted from the "Power Reduction" value, this is an estimate of the
2
quantity of CO
emissions reduced when using the monitor for one hour.
2
• The figures are calculated based on the Emission factors by electric power company (FY2020
results) - TEPCO Energy Partner "Menu J (residual)" published by the Ministry of the
Environment of Japan.
Auto EcoView
Settings: "On" / "Off"
The ambient light sensor on the front of the monitor detects the ambient brightness to
automatically adjust the screen brightness to a comfortable level using Auto EcoView.
The power consumption of the backlight can be curtailed by adjusting the brightness to an
appropriate level.
This function can also mitigate eye strain and tiredness caused by a screen that is too bright
or too dark.
Note
• Be careful not to block the ambient light sensor on the lower side of the monitor when using Auto
EcoView.
• Even when Auto EcoView is set to "On", you can change the brightness of the monitor using the
operation switches (
manner in which Auto EcoView changes the brightness will also vary depending on the value
you set.
• When "DICOM" is selected for the color mode, the Auto EcoView setting is turned "Off".
EcoView Optimizer 2
Settings: "On" / "Off"
The monitor automatically adjusts the screen brightness according to the white level of the
input signal.
This function can reduce power consumption while maintaining the brightness specified by
the input signal.
Note
• The EcoView Optimizer 2 setting becomes "Off" in the following cases:
– When "Movie" or "DICOM" is selected for the color mode
– When using PbyP/PinP display
• When set to "On", the appearance of pale colors may change. If this bothers you, set this
function to "Off".
2
) on the front of the monitor or in the color adjustment settings. The
Basic Adjustment/Setting | 2
Reduction, and Eco Performance Level) can be
17
Advertisement
Table of Contents
