Teac SR-L38MP3 Owner's Manual page 17

MEMORY
To cancel the program playback mode
Press the STOP (H) button. "MEMORY" indicator
disappears, but the programmed contents aren't
lost.
To return to the program mode, press the
MEMORY button.
To check the programmed order
In the stop mode, press the MEMORY button
repeatedly to show the track numbers that have
been stored in memory.
To add a track to the end of the
program
In the stop mode, press the MEMORY button
repeatedly until "00" appears on the display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY button.
The track is added to the end of the program.
OPEN/CLOSE
To overwrite the program
In the stop mode, press the MEMORY button
repeatedly until the track number to be changed
appears on the display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY button.
To clear program
In the stop mode, do either of the following to
clear the program:
< Press OPEN/CLOSE button (L) on top of the unit to
open the CD compartment.
< Press the MEMORY button and then the STOP (H)
button.
< If the unit is disconnected from the power supply,
the programmed contents will be cleared.
17