Transmit Error - Panasonic KX-MC6040 Operating Instructions Manual

11. Help
Display
"Memory Overflow"
"Modem Error"
"No Fax Reply"
"Out of Paper Input Tray
#1"
"Paper Jammed"
"PC Fail or Busy."
"Please Wait"
"Redial Time Out"
"Remove Document"
"RX Memory Full"
"Scanner Position Error"
"Self Calibration"

"Transmit Error"

"Toner Cartridge Not
Installed"
"Tray #2 Left Cover
Open"
84
Cause & Solution
L When printing a file, the document being stored exceeded the memory
capacity of the unit. Change the printer settings (page 29).
L There is something wrong with the unit's modem. Contact our service
personnel.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L Recording paper is not installed or the paper input tray has run out of paper.
Install paper (page 16, 30).
L Recording paper was not fed into the unit properly. Reinstall the paper
(page 16, 30).
Note:
L "#1": Standard input tray
L "#2": Optional input tray
L "#1+#2": Standard input tray and optional input tray
L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 95).
L The cable or the computer power cord is not connected correctly. Check the
connections (page 18, 26).
L The software is not running on the computer. Restart the software and try
again.
L The unit is warming up. Wait for a while.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L The document is jammed. Remove the jammed document (page 100).
L Attempted to send or copy a document longer than 600 mm (23
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 16) or remove the jammed
paper (page 95).
L If feature #442 (page 62) is set to "Always",
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 (page 62) is set to "On",
– view, print or save the received fax documents (page 48, 49), and then
erase the unnecessary documents (page 49).
– turn the setting to "Off". The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 62) to "On", and then print the received fax
documents (page 49).
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
L The unit is changing the color calibration. Wait for a while.
L A transmission error occurred. Try again.
L The toner cartridge is not installed. Install it (page 11).
L The left cover of the optional input tray is open. Close it.
For assistance, please visit http://www.panasonic.com/help
5
/ ") using
8