Panasonic KX-MC6040 Operating Instructions Manual page 59

Feature/Code
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
Holding the previous contrast
setting
{#}{4}{6}{2}
Setting the default operation
mode
{#}{4}{6}{3}
Setting the default operation
mode timer
{#}{4}{6}{4}
Cleaning the drum
{#}{4}{8}{0}
Setting toner save feature
{#}{4}{8}{2}
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{4}{8}{5}
Changing the color
calibration for cyan
{#}{4}{8}{6}
Changing the color
calibration for magenta
{#}{4}{8}{7}
Changing the color
calibration for yellow
{#}{4}{8}{8}
Changing the color
calibration for black
{#}{4}{8}{9}
Selection
To set the length of time before the unit enters power save mode.
{1} "5min": 5 minutes
{2} "15min" (default): 15 minutes
{3} "30min": 30 minutes
{4} "1h": 1 hour
Note:
L When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
{0} "Disabled" (default): Deactivates this feature.
{1} "Enabled": The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} "Copy" (default): Copy mode is selected as default.
{2} "Fax": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
{0} "Off": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
Clean the drum cartridge automatically. See page 104 for details.
{0} "Off" (default): Deactivates this feature.
{1} "On": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Change the color calibration if color printing is too dark or too light. See page 76
for details.
9. Programmable Features
59