Report Messages (Kx-Mb2030 Only) - Panasonic KX-MB2000 Operating Instructions Manual

Panasonic kx-mb2000: user guide
Hide thumbs Also See for KX-MB2000:
Table of Contents

Advertisement

11.1 Report messages (KX-MB2030 only)

To indicate the unit's fax transmission/reception status, one of the following messages will be printed on the
confirmation and journal reports (page 41).
Message
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
JUNK FAX PROH. REJECT
MEMORY FULL
NO DOCUMENT / FAILED PICKUP
OTHER FAX NOT RESPONDING
PRESSED THE 'Stop' KEY
THE COVER WAS OPENED
OK
Code
For assistance, please visit http://www.panasonic.com/help
Cause & Solution
40-42
R A transmission or reception error occurred. Try
46-72
again or check with the other party.
FF
43
R A line problem occurred. Connect the telephone line
44
cord to a different jack and try again.
R An overseas transmission error occurred. Try using
the overseas mode (feature #411 on page 59).
-----
R Remove the jammed document (page 90).
53
R A transmission or reception error occurred because
54
of a problem with the other party's fax machine.
59
Check with the other party.
70
-----
R The junk fax prohibitor feature of this unit rejected
fax reception.
-----
R The memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Load paper (page 14) or remove the jammed paper
(page 85).
R If the PC fax setting (feature #442 on page 62) is set
to "ALWAYS", check the connection between the
computer and the unit.
R If your unit is connected to the computer via the LAN
and the fax preview mode (feature #448 on
page 50) is set to "ON", view, print or save the
documents on the web browser, and then erase
unnecessary documents (page 50).
-----
R The document was not fed into the unit properly.
Re-insert it and try again.
-----
R The other party's fax machine is busy or has run out
of recording paper. Try again.
R The other party's fax machine rings too many times.
Send the fax manually (page 41).
R The other party's machine is not a fax machine.
Check with the other party.
R The number you dialed is not in service.
-----
R MStopN was pressed and fax communication was
canceled.
-----
R The top cover was opened. Close it and try again.
-----
R Fax transmission or reception was successful.
11. Help
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-mb2010Kx-mb2030Kx-mb2000cKx-mb2010cKx-mb2030c

Table of Contents