Panasonic KX-MB2000 Operating Instructions Manual page 61

Feature/Code
Setting the ring pattern for fax
(Distinctive Ring feature)
MBNM4NM3NM1N
Setting auto reduction
feature
MBNM4NM3NM2N
Changing the fax activation
code
MBNM4NM3NM4N
Setting the memory reception
alert
MBNM4NM3NM7N
Setting friendly reception
MBNM4NM3NM8N
Selection
M1N "A"
M2N "B"
M3N "C"
M4N "D"
M5N "B-D" (default)
See page 53 for details.
To receive a fax document that is longer than your recording paper.
M0N "OFF": The unit will print received documents at their original size.
M1N "ON" (default): The unit will fit received documents onto your recording
paper.
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
M0N "OFF"
M1N "ON" (default)
1. MMenuN A MBNM4NM3NM4N
2. Press M1N to select "ON". A MSetN
3. Enter your code from 2 to 4 digits, using 0–9, MGN and MBN.
R The default code is "H#9".
R Do not enter "0000".
4. MSetN A MMenuN
To alert you with a beeping sound when a received fax document is stored into
memory.
M0N "OFF": Deactivates this feature.
M1N "ON" (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 74 to page 76 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
R If documents are stored into memory due to activating the web fax preview
(feature #448 on page 50), the unit will not beep. However, the unit will start
to beep when the memory is nearly full.
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N "OFF": You have to press MStartN, and then M2N for fax reception.
M1N "ON" (default): You do not have to press MStartN, and then M2N for fax
reception.
9. Programmable Features
61