Table of Contents
Advertisement
The currently used (locked-) frequency for the DLL can be viewed live on the right side of the GUI in the 'DLL Frequency
Lock' bar (or alternatively at the frequency parameter in the home menu).
Finish:
With the frequency optimized, the chosen material will be processed as per the user requirements. Of course, the exact
timing of this process depends on the size of the material and the RF power used and needs to be determined in by the
user.
AN-50-001 Rev.: OR
DCO-000695
(11/01/21)
File: AN-50-001.docx
This document and its contents are the property of Mini-Circuits.
Page 13 OF 19
Advertisement
Table of Contents
Need help?
Do you have a question about the ISC-2425-25+ and is the answer not in the manual?