Huawei WATCH 3 Series Manual page 9

Technical diving: You can set Gas, Water type, GF, Oxygen partial pressure limit,
•
Bottom depth, Reminders, Alerts, and Notification method.
Scuba dive: You can set Water type and Notification method.
•
Starting your dive
Before each dive, check the diving settings and device battery level, and manually select
and enter a diving mode. You can check the diving mode icon on the diving data home
screen, to make sure that the device is working as normal.
1
Press the Up button on the watch to open the app list, and go to Workout > Diving.
2
Select a diving mode. For certain diving modes, you'll need to set the parameters in the
diving settings screen. Once the settings are complete, touch OK.
3
Press the Down button on the watch or touch the start icon to begin your dive. While
diving, you can:
Press the Down button or rotate the crown to scroll on the screen.
•
Stopwatch: When you scroll to the stopwatch screen, you can press the Up button
•
to start/pause/resume timing, and press and hold the Up button to reset the
stopwatch.
Compass: When you scroll to the compass screen, you can press the Up button to
•
lock/unlock navigation directions.
During technical dives, you can press the Assist button on the watch to view the
•
advanced settings.
Switch gas: Press the Up button to select Switch gas, and press the Down button
•
to open the gas list. After selecting a gas, press the Down button to confirm the
switch.
Edit gas: Press the Up button to select Edit gas, and press the Down button to
•
open the gas list. After selecting a gas, edit Oxygen concentration and Helium
concentration, and press the Down button to confirm the edit. The watch will
automatically switch to the selected gas.
4
After you return to the surface after a dive, press and hold the Up button to end the
diving session.
5
After the dive, gently rinse the watch with fresh water or soak it in clean water for 15
minutes, to clean off any sea salt, silt, or other substances. Swipe down on the watch face
screen to enter the shortcut menu and touch Drain. Then, wait for the watch to dry.
The watch will show a no-fly time after each dive, during which you are advised not to
travel by plane.
Diving tools
Press the Up button on the watch to open the app list, and go to Workout > Diving > Dive
tools.
Calculate NDL
•
Outdoor Exploration
7