Huawei WATCH 3 Series Manual page 11

2
Touch at the bottom.
Battery: When in Expedition mode, the Raise to wake feature is enabled by default.
•
You can toggle off the switch to disable it. You can also touch Positioning interval to
set Time or Steps.
Storm warning: You can choose to enable or disable Warnings. When it is enabled,
•
you can set Pressure drop.
Record at night is enabled by default, and you can toggle off the switch to disable it.
•
Dim after sunset is enabled by default, and you can toggle off the switch to disable it.
•
Starting an outdoor expedition
1
On the watch face screen, press the Assist button on the watch to access the Expedition
screen, then touch Start.
2
During the expedition:
Waypoint distance: Waypoints are the important locations marked through
•
positioning technologies, like a crossroad and a medical service station. Waypoint
distance is the sum of the distances of the waypoints connected in a straight line.
Mark: On the home screen of Expedition, press the Down button or touch Mark to
•
manually mark a location. Touch Markers to view and edit the marked locations.
Markers only count the number of manually marked locations.
A maximum number of 500 markers are allowed.
Dim: On the home screen of Expedition, press the Assist button on the watch to enable
•
or disable Dim mode.
Tools: On the home screen of Expedition, swipe down on the watch screen to access
•
Tools, like SpO2 and Flashlight.
Lock screen/Unlock screen: On any screen of Expedition, press the Up button on the
•
watch to lock or unlock the screen.
Touch Home screen to halt the recording of expedition data. You can resume this
expedition by opening the app again and touching Resume.
3
On the home screen of Expedition, swipe down on the watch screen twice to go to the
route back screen. Touch Backtrack to navigate to a place near the starting point.
Touch Navigate to display the marked locations, rotate the Up button to switch between
marked locations, and press the Up button to select a marked location. Touch Navigate to
navigate to a place near the marked location.
4
Press and hold down on the Up button on the watch to end the outdoor expedition.
Viewing expedition records
On your watch:
1
Press the Assist button on the watch to access the Expedition screen, and touch
Expedition records to display the expedition records.
Outdoor Exploration
9