Tests: Service Tests
2.2.4 LED
Check that the:
- Notification LED as shown position by blue circle will show
three different colors in the following sequence: red, green
and blue. Each color will be shown for two seconds.
Press the Back key to return to the Service Test Menu.
2.2.5 Illumination
Check that the:
- Display backlight illumination should shift from low to high
strength back to low again.
Press the Back key to return to the Service Test Menu.
2.2.6 Light Sensor
The Ambient Light Sensor test states a value. The value
should increase when the window gets more light and
decrease when the window gets less light.
Press the Back key to return to the Service Test Menu.
1277-1359 Rev 2
© Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
9(25)