Tests: Manual Tests
2.4
Network Test
2.4.1 On-the-air call to mobile (Single SIM)
2.4.1.1
On-the-air call to mobile
GSM
Go to the Setting app:
Settings
More..
Ensure that the Network Status icon show signal strength and show no symbol or E at the top of the
display.
To verify the radio functions (GSM) of the phone, follow the '2.4.4 Procedure (GSM & UMTS)' below.
UMTS (if available)
Go to the Setting app:
Settings
More..
Ensure that the Network Status icon show signal strength and show 3G or H+ (HSPA) at the top of the
display.
To verify the radio functions (UMTS) of the phone, follow the '2.4.4 Procedure (GSM & UMTS)'.
2.4.2 On-the-air call to mobile (Dual SIM – SIM1)
GSM
Go to the Setting app:
Step1: Settings
Dual SIM setting
Ensure that the Network Status icon show SIM1signal strength and show no symbol for SIM2 at the
top of the display.
Step2: Settings
More...
To verify the radio functions (GSM) of the phone, follow the '2.4.4 Procedure (GSM & UMTS)' above.
WCDMA
Go to the Setting app:
Step1: Settings
Dual SIM card
Ensure that the Network Status icon show SIM1signal strength and show no symbol for SIM2 at the
top of the display.
Step2: Settings
More...
only
To verify the radio functions (WCDMA) of the phone, follow the '2.4.4 Procedure (GSM & UMTS)'
above.
1277-1359 Rev 2
© Sony Mobile Communications AB – Company Internal
Mobile networks
Network Mode
Mobile networks
Network Mode
enable SIM1 and disable SIM2
Mobile Networks
enable SIM1 (WCDMA/GSM) and disable SIM2 (GSM)
Mobile Networks
GSM only
WCDMA only
Select SIM card SIM1 Network mode
Select SIM card SIM1 Network mode
Test Instructions (mech)
GSM only
WCDMA
22(25)