Troubleshooting - Asko WT63 Series Use And Care Manual

14
If the appliance is not working properly, check through the following troubleshooting list before calling for
technical assistance.In some models malfunctions are shown with a code at the end of the cycle.
Code: E:00 Carry out all checks listed in paragraphed marked with *
E:01 Carry out all checks listed in paragraphed marked with **
E:02 Technical malfunction "Call Customer Service"
E:03 Technical malfunction "Call Customer Service"
The washing machine does not work (warning
lights are off) (Display off)
• check that:
1) The mains power supply is working
2) The plug is inserted correctly in the socket
3) The On/Off button has been pressed, or if
there isn't any, that the programming knob is
positioned on a program.
The washing machine does not work (warning
lights are off) (Display on)*
• check that:
1) The program has been selected
2) The Top is closed properly
3) The "Start" button has been pressed (electronic
models only)
4) check the indications provided under "The
washing machine does not fi ll with water"
The washing machine does not fi ll with water*:
• check that:
1) There is water in the water supply system
2) The water supply hose is connected to the
washing machine
3) The water supply tap is open
4) The fi lter is not blocked. If it is, clean the fi lter
after unplugging the appliance from the power
supply
The washing machine continuously fills and
drains the water**:
• check that:
1) The drain hose has been installed at the proper
height (60-90 cm)
2) The end of the drain hose is not under water
The washing machine does not drain or spin**:
• check that:
1) The drain hose is properly connected
2) The drain hose is not bent
3) The drainage fi lter is not blocked
4) The no-spin function has not been selected
5) The "stop with water" function has not been
selected.
The washing machine vibrates and is noisy
• check that:
If, after trying the above remedies, the machine still does not work, refer
the fault to the nearest authorised service centre.
When calling the service centre, inform them of the machine model, the
serial number and the type of fault.
This information will allow the technical service staff to select the ap-
propriate spare parts, thus making the repair service quicker and more
effi cient (fi g. 27).
GB
MAINTENANCE

TROUBLESHOOTING

1) All the blocking elements used for transportation
have been removed.
2) the washing machine is level
3) Bulky items such as sheets, tablecloths etc. are
not all in one part of the drum
The top does not open
• check that:
1) the wash cycle is fi nished.
2) the "stop with water" function has not been
selected (automatic on some models).
The washing has not been properly spun
• check that:
1) The washing is evenly distributed in the drum
2) The correct spin speed has been selected
The washing machine stops during the wash
• check that:
1) The mains power supply is working
There is still a lot of detergent in the compartment
• check that:
1) The water supply tap is open
2) The fi lter between the tap and the supply hose
is clean
The washing is not clean at the end of the wash cycle
• check that:
1) The drum is not overloaded
2) The correct amount of detergent has been used
3) The correct programme has been selected
The washing has shrunk or faded
• check that:
1) The correct washing programme has been
selected
2) The correct washing temperature has been se-
lected
The washing machine does not dry (washer-dryer
models only)
• Make sure that:
1) The water supply tap is open
2) The drainage fi lter is clean
3) The washing machine is turned on (spy light or
display on)
4) The drying program has been selected
5) The drying time has been set
model
N ° 204276237
220 V Hz
heating wash
kg wash
kg dry heating dryer
2 wash motor
5 / 100 N/cm
spin motor
A
dryer motor
pump
total w
27
SM2138
W
W
W
W
W
W