Table of Contents
Advertisement
2 Installation Planning
Before installing the DURACELL HUB, read all instructions and warnings in this manual. The DURACELL HUB can be
installed in an indoor and outdoor non-corrosive environment (not marine environment). Wall mounting hardware
is not included.
CAUTION! All electrical installation work should be performed in accordance with local building and electrical
codes.
WARNING! Isolate the DURACELL HUB from all energy sources prior to electrical installation by means of
disconnects, breakers or connectors. Failure to properly isolate either AC or DC sources may result in serious injury
or death.
NOTE: Communication cables between the DURACELL HUB and the battery system are limited in length. The
DURACELL HUB should be installed within 2 ft of the battery system.
CAUTION! Do not install in direct sunlight.
2.1 Installation clearances between the DURACELL HUB and the battery system
The DURACELL HUB includes a 10 foot communication cable that connects the hub to the battery system. If the
installation is constrained such that the DURACELL HUB must be located greater than 24" from the battery system,
consult the DURACELL POWER CENTER 5KW Installation & Startup Manual for instructions on creating an extended
communication cable.
Max: 24"
(600 mm)
Figure 8: Installation clearances between the DURACELL HUB and the ESS.
5
Advertisement
Table of Contents
