Host Name - Panasonic PT-L735NTU User Manual

Network setting
Format:
Switching between hexadecimals and characters using [
• Use Change the format for WEP key entry.
Key 1 to Key 4:
Using [ •
• A hexadecimal digit: Use 10 digits of 0 to 9 and A to F for entry in 64 bits and
use 26 digits of the same in 128 bits.
Text: Use 5 alphanumeric characters in 64 bits and 13 characters in 128 bits.
• Use Characters should be consistent with the settings of the personal computer
and the access point.
Bringing network settings into effect
Select [Run] and press [ENTER].
Simple connection
Toggling between ON and OFF using [
• Use Select ON to use Simple Connection in Wireless Manager.
• If ON is selected, the projector cannot enter the LAN 1 to LAN 3 network setting modes.

Host name

Using [ •
• Use This defines the name of the projector on the network. Use up to 16
alphanumeric characters.
Web control
Toggling between ON and OFF using [
• Use Select ON to control the projector from the browser.
Web power supply
Toggling between ON and OFF using [
• Use Select ON to light the lamp of the projector from the browser when the
lamp is unlit.
• Use When ON is selected, power consumption will become higher than the
normal standby condition.
Web password
Using [ •
[ENTER].
• Use This will be the password to be entered on the top page on which the
projector is controlled from the browser.
SD mode
Switching between Viewer and Web using [
• Use Viewer: Selection of the SD channel will display thumbnails of image files on the SD
card.This mode can be used when the projector operates on a stand-alone basis.
• Use Web: Selection of the SD channel will not display thumbnails of image files
on the SD card.
• Use Select Web to perform presentation using the image data on the SD card
by controlling the projector from the browser.
], select characters and press [ENTER].
], select characters, press [ENTER], select [Run] and press [ENTER].
], select characters, press [ENTER], select [Run] and press
]
]
]
]
]
29