Wireless Simple Connection (live mode)
Operations on the personal computer
Insert the optional wireless card into the personal
1
computer.
2
Turn ON the power supply of the personal computer.
Go to [Start] → [All Programs] → [Wireless Manager],
3
and select [Wireless Manager 3.0].
A window appears as shown below.
4
Check [Use Easy Connection] and select
[Live mode].
The image on the personal computer screen will be projected on the projector
screen.
Notes:
• If [Restore to original LAN Setup when finished] has been checkmarked, the LAN
settings before Simple Connection setting will be restored when Wireless
Manager 3.0 ends.
• In Windows XP, [Restore to original LAN Setup when finished] cannot be set.
22
(See page 13)
Specify different numbers to
different personal computers.
Simple Connection is available to
up to 20 personal computers.
However, simultaneous use is
not possible