Use of Wireless Manager 3.0
Start-up
Go to [Start] → [All Programs] → [Wireless Manager], and
select [Wireless Manager 3.0]
Select the function you want to use in the window when it appears as shown below.
Live mode
Images on the personal computer screen are directly transferred to the projector.
Since a single personal computer occupies the projector in this mode, the wireless
card does not allow other personal computer(s) to connect to the projector.
Selecting the transfer mode
Right-click the resident icon at the
right bottom of the PC screen, go to
[Option], and select [Live settings].
Four modes are available for
selection: [Normal mode], [Natural
pictures mode], [Fast mode], and
[High quality mode]. [Normal mode] is
selected on factory shipping.
38
Notes:
• If [Use Simple Connection] has been
checkmarked, setting of the IP address for
the personal computer, the SSID for the
wireless LAN, communicate mode and other
options will be automatically carried out.
When a down list appears on the right,
select different numbers for computers if you
use two or more personal computers.
• If [Restore to original LAN Setup when
finished] has been checkmarked, the LAN
settings before Simple Connection are
restored when Wireless Manager ends if
Simple Connection is used.However, in
Windows XP, this check box does not
appear. If [Use Simple Connection] has not
been checkmarked, [Restore to original LAN
Setup when finished] does not appear.