Download Print this page

Daikin Clima-Flex CLIWP Series Control Manual page 16

Direct expansion unit with fixed air cooled compressor

Advertisement

By pressing the down key, scroll the adjustment menu to number
5.
Press enter and use the up and down keys to verify that these
parameters are set.
Warning: these parameters should only be manipulated by a
professional.
By pressing the up or down key, scroll the regulation menu to
number 4. In case you need to adjust the measurements or tests
for the electronic valve, from this menu you can select the desired
opening for the valve.
Warning: These parameters should only be manipulated by a
professional.
cm-cliwp-cf-eng
CLIWP CONTROL BY UNIVERSAL 7 DAY
THERMOSTAT P722Uc
FRONT PANEL CONTROLS
System heating/off/cooling mode switch:
Set this switch to HEAT to control your heating system and COOL
to control your cooling system. The OFF position will disable the
heating and cooling units.
Fan mode switch, auto/on:
When in AUTO, the fan (if present in your system) will cycle on and
off only when heating or cooling. In the ON position, the fan will run
constantly at all times with or without a heating or cooling demand.
Multifunction, slide switch:
It provides easy access to common settings, and should always
remain in RUN, unless a particular point is being modified.
NOTE: When the thermostat is in the non-programmable
"Manual" mode, all 5 switch positions will function
as RUN, except the "FILT/ENERGY" location.
Up/Down buttons:
The UP and DOWN buttons are used to control the set temperature
or adjust any other item on the display. Usually, a flashing item can
actually be adjusted.
Hold button:
This button activates and deactivates the manual hold temperature
application, which maintains a fixed set temperature indefinitely
without following a program routine.
Postpone button:
This button activates and deactivates the POSTPONER function,
which overrides the set temperature for a modifiable duration.
EMER button:
For heat pump systems: this button activates the Emergency Heat
mode and prevents the outdoor unit from running. For conventional
systems (without heat pumps), this button will have no effect on the
normal RUN mode.
16
Control
www.clima-flex.com

Advertisement

loading