Mount The Water Heater To The Wall - Rinnai SENSEI RSC160i Installation And Operation Manual

4.4 Mount the Water Heater to the Wall

4.4. 1 Mount the Internal
(Indoor) Water Heater
You Will Need:
• Rinnai Tankless Water Heater

(Internal/Indoor Model)
• Wall Mounting Bracket
Supplied by Installer:
• Level
• 4 Screws for mounting bracket installa-
tion

Use appropriate screws for type of wall
constructions.
Instructions:
1. Hold the wall mounting bracket up against
the wall and use a level to make sure the
bracket is even. Proper installation requires
the water heater to be level.
Figure 9: Level the bracket
2. Use four screws to secure the wall mounting
bracket to the wall (two screws on the far left
side and two screws on the far right side).
Use the appropriate screws for the wall
construction to secure the mounting bracket
to the wall between two studs.
Figure 10: Secure the bracket
24
3. Insert the top bracket into the wall mounting
bracket. Make sure the wall mounting bracket
is attached to the wall and can hold the weight
of the water heater before you fully let go.
Figure 11: Mount the top bracket
Rinnai Tankless Water Heater Installation and Operation Manual